VC-201 Series Digital Weight Indicator
Standard Features
10,000 Display resolution ( NTEP )
10 Pre-defined Tare value (VC202 & VC203)
Selectable kg / lb / g / oz
Programmable as Main Indicator & Remote Display
Programmable custom print format
Configurable for Animal Weighing Application
Easy Panel Mount Design
Optional Re-chargeable battery
We have developed a new cost competitive digital weight indicator – the VC-200 series that was launched recently on the market. This series comes in 3 models, the VC-201 (plastic casing), VC-202 (plastic casing) and VC-203 (stainless steel) affordably priced.
VC-200_Series.pdf
VC200 series setup manual rev G.pdf
| Specifications |
| Internal Resolution |
1,000,000 counts at 3mV/V |
| Display Resolution |
Selectable |
| Input Sensitivity |
1µV/graduation typical, 0.4µV/graduation minimum |
| Display Increments |
Selectable x1, x2, x5, x10, x20, x50, x100 |
| Decimal Point Location |
Selectable 0 ~ 4 |
| Display |
7 Digits 7-Segment LED display, 14.2mm (0.56”) high, with
annunciators (7 LED lamps) for function select, Stable, Center Zero,
Net, Print, kg, lb, and Low Battery display
135 |
| Keyboard |
6 button keypad with tactile keys (includes 1 button for Power On/Off) |
| Audio Alarm |
Tone for key entry confirmation and low battery alarm |
| A/D Conversion Rate |
7.5 updates per second |
| Load Cell Excitation Voltage |
9.7VDC or 5VDC selectable. Drive up to six 350 ohm load cells |
| Analog Input Range |
0.2mV/V to 3.0 mV/V maximum |
| Non-Linearity |
0.01% of full scale or less |
| Over Capacity |
Display “CAP OL” when exceeds the full scale capacity |
| Tare |
Full capacity, push button tare |
| Auto Zero Tracking |
Selectable to 3.0 d by 0.5 d step |
| Motion Window |
Key-in data 0..255 (1 = 0.5 d) |
| Calibration Method |
Software – Menu driven prompting |
| Units of Measure |
Selectable kg/lb/g/oz, up to 2 units displayable |
| RFI/EMI Protection |
All signal and excitation lines filtered to –65db min. @ 500MHz |
| Filtering |
Selectable digital filter |
| Serial RS232C Data Output |
COM Port 1. Full Duplex or Bi-directional
COM Port 2. Simplex or Unidirectional (output only)
Selectable baud rates (1200,2400,4800,9600,19200), manual or auto
print, continuous data out or bi-directional communication |
| Remote Display |
Programmable as Remote Display |
| Print Format |
Gross Wt, Tare Wt, Net Wt |
| Power |
100/115VAC or 220/230VAC, 50-60Hz, 6VA with built-in Charger for
12 VDC 2-2.3AH Rechargeable Sealed Lead Acid Battery
(Battery Dimension 67 (H) x 178 (W) x 34 (D) mm, is optional) |
| Current Consumption |
100mA + 30mA per 350 ? load cell |
| Operating Temperature |
-10°C to + 40°C |
| Relative Humidity |
Maximum 90% RH, Non-condensing |
| Shipping Weight |
1.2kg (2.3kg with optional battery |
| Enclosure |
ABS Plastic Casing |
| Warranty |
One Year Limited Warranty |
Available Options (add to cart below):
VC201 (plastic casing)
VC202 has standard two setpoints with 5 VDC output to a relay
VC203(stainless steel)
|
