Intercomp CS-1500 Crane Scale
Intercomp CS-1500 Low-cost, high performance NTEP certified digital crane scale. All electronics are shock mounted in a weatherproof cast aluminum case. This assures maximum protection against moisture, dust, and rough usage. High visibility 0.8 inch/20 mm LED digital readout provides easy reading of weights; recessed push button switches allow simple, trouble-free operation.
Intercomp’s advanced design makes this remarkable crane scale the first choice over other electronic units. It’s value packed with the industry’s most wanted features. Our ultra-high resolution, 20-bit A/D converter provides the highest accuracy available +/-0.1% of applied load.
Our unique design flexibility lets you choose the model and weighing capacity you need - ranging from 250 to 10,000 Ib/125 to 5,000kg. Keypad setup and digital calibration enhance ease of operation. All electronics are shock mounted in a weatherproof cast aluminum case. This assures maximum protection against moisture, dust, and rough usage. High visibility 0.8 inch/20mm LED digital readout provides easy reading of weights; recessed push button switches allow simple, trouble-free operation.
Power is supplied by 8 "D" cell batteries. Efficient microcontroller gives up to 100 hours of battery life. All units carry a full one-year parts and labor warranty. For all your overhead industrial weighing needs, look to Intercomp every time.
CS1500.pdf
Specifications
| CONTROLS |
| General: |
Zero, lb/kg, On, Off |
| Display: |
0.8 inch / 20 mm high -5 1/2 digit light emitting diode (LED) |
| Indicators: |
lb/kg |
| ELECTRICAL |
| Battery Life: |
Up to 100 hours continuous use |
| Batteries: |
8 x D size disposable alkaline dry cells or
rechargeable nickel-cadmium cells. (not included) |
| Resolution: |
20 bit A/D delivers over 1,000,000 internal counts. |
| Filtering: |
6 pole, 10 hertz low pass |
| Auto Shut-Off: |
Low battery, or after 5 minutes without use |
| Auto-Zero: |
Satisfies all NIST/OIML requirements |
| Zero: |
Up to 100% excluding NIST/OIML units |
| PERFORMANCE |
| Speed: |
3 Seconds to typical reading |
| Accuracy: |
+/- 0.1% of reading |
| ENVIRONMENTAL |
| Humidity: |
10 to 95% non-condensing |
| Temperature: |
Operating -20 C to +60 C / -4 F to +140 F |
| PHYSICAL |
|
| Nominal Overload: |
200% of capacity |
| Maximum Overload: |
500% of capacity |
| Enclosure: |
NEMA IV Cast aluminum case |
| Hook, Eye or Shackle: |
Crosby - Laughlin or equivalent |
| Options: |
RS232 serial output
Wireless remote control
LCD display
NIST/OIML approval pending. |
Lead time for this product is 2 to 3 weeks
